your packaging engineering partner

P5 LN - P10 LN - P17 LN - P27 LN - P30 LN - P55 LN

PORTIVE IMPULSE SEALING TONG FOR OUT PUT OF ISOLATOR

P55 LN3 NEW GENERATION

Manual Sealing Machines

PORTABLE TONG WITH GENERATOR BOX ON WHEELS

QUALITY OF SEALING

COMFORT

RAPID CHANGING OF SEALING CONDITIONS

EASY MAINTENANCE

STRENGTH OF STRUCTURE – SHELFLIFE

DESIGN AND MANUFACTURE BY THIMONNIER

 

Industry

AIRTIGHT SEALING OF QUALITY FOR SHEATHS AND HEAT SEALING FILMS (EVA, PE, PU & PVC) 

Equipments especially designed for sealing sheaths and sleeves for glove compartments (input or output of isolators and other elements), with no loss of containment in : 

MEDICAL INDUSTRY & NUCLEAR INDUSTRY

TECHNICAL SPECIFICATIONS

« T » TONG 
WELDING SEAM LENGTH:
P5 : 50 MM
P10 : 100 MM
P17 : 170 MM 

« I » TONG 
LONGUEUR DE SOUDURE :
P27 : 270 MM
P30 : 300 MM
P55 : 550 MM 

WELDING SEAM WIDTH: 8 MM* 

* P30 is equipped with an upper jaw of 6 mm and a lower jaw of 8mm.
 

 

2 TYPES OF GENERATORS : LN2 = CONTROL BY RELAY OR LN3 = AUTOMATION CONTROL 

Temperature control of impulse welding elements, indicating temperature and adjustment, increasing the life of the insulating Teflon ribbon and ensuring the repeatability of the welds 

Welding cycle preset selectable when changing material or thickness (2 for 1 LN2 and LN3 generator for the generator) with anti-replay system) 

Mounted on wheels with control elements presented in front 

Low maintenance teflons change and resistance 

Seal width 8mm with granita appearance 

The clamp components are designed to not hurt the materials during their introduction into the welding jaws 

Welding jaws mounted on pivots for a better distribution of the welding force 

Profile of the impulse welding elements designed to increase the strength of the welds. High welding pressure achieved effortlessly through an original mechanical device Reopening very easy at the end of cooling

Light and sound warning at the end of welding and cooling cycle 

Storage of the tong on the top of the carriage or vertically on the side 

Interchangeability : connector for rapid connection of two clamps models on the same case 

Ambidextrous use

 

STANDARD EQUIPMENT

Power supply
230V Mono – 50Hz
0.9kVA during sealing 

CASE 
Weight 30 kg
Dimensions 400 x 500 x 800 mm 

TONG 
Adjustable clamping force de 5 à 40 daN
Force required to open clamp tightening < 7 daN 
Connection cable: L = 8 m