EXCELLENT SEALING ABILITY
DESIGNED AND MANUFACTURED BY THIMONNIER
CHEMICALS AND DÉTERGENTS
CONCENTRATED POWDER OR LIQUID DÉTERGENTS, COOLANTS, DISTILLED WATER, PAINT, MOTOR OIL, WASHER, WIPER FLUID…
COSMETICS AND PHARMACEUTICALS
LIQUID SOAPS, CREAMS, SHAMPOO, STERILE WATER, BODY OILS…
SEALING OF ALL TYPES OF HEATSEALING FILMS (POLYETHYLENE, POLYPROPYLENE) AND LAMINATED FILM (PAPER/POLYETHYLENE, ALUMINIUM/POLYETHYLENE, PAPER/ALUMINIUM/POLYETHYLENE).
UV D3 is designed to seal/close preformed DOYPACK® pouches, vertically presented, after filling.
RATE OF PRODUCTION: FROM 3 TO 8 POUCHES/MIN
MAXIMUM POUCH SIZE: L 320 X H 400 MM
BI-ACTIVE HEAT-IMPULSE SYSTEM (TWO HEATING JAWS), ALLOWS HIGH QUALITY SEALING.
The jaws are activated by a pneumatic cylinder and are adjustable according to bags dimensions.
The sealing part is fitted on a stainless steel frame. The control box is also built into stainless steel, and is completely waterproof (IP65).
The welding cycle is automatic. First the operator places the bag between the jaws. Then, to begin the welding process, he only has to push the manual switch with the back of his hand.
- Closing of the jaws
- Welding of the bag
- Jaws kept closed during the cooling time
- Opening of the jaws
The entire time of these operations never exceed 5 seconds but often is shorter. During the sealing cycle, the bag is held, letting the hands of the operator free to fill the next bag.
The welding and cooling time are controlled with 2 timers fitted on the control panel. Time adjustments are drawn up according to the materials used and output required.
Film thickness: up to 2 x 200 microns
Welding seam length: 320 mm
Welding seam width: 3 mm
Column height: 65 cm
Table height: 80 cm
Global dimensions: l 100 x p 70 x h 140 cm
Power supply: 230 V Mono - 50 / 60 Hz - P = 700 VA during sealing
Compressed air supply: Network pressure = 7 to 9 bars Input pressure = 6 bars - Q = 0.5 nl/cycle
Thimonnier inaugurates its new showroom dedicated to small machines (manual and semi-automatic sealing machines), within its factory in Saint Germain au Mont d'Or.
Come to dicover it!
Thank you to the many visitors who came to us during PACK EXPO LAS VEGAS which took place from 23 to 25 September 2019 on the stand of our partner Hood packaging.
October 2019 : K, Germany
November 2019 : ANDINA PACK Colombie - EUROPACK CFIA LYON - SARA, Ivory Coast
Mars 2020 : CFIA Rennes
Avril 2020 : DJAZAGRO, Algeria
Mai 2020 : Interpack, Germany
Novembre 2020 : ALL4PACK, Paris
Sylvie GUINARD, President of Thimonnier, was pleased to welcome last Friday, May 11, 14 students from this third school year as part of their teaching module "Packaging & Packing" .
Discover the new video of the spout filling line for DOYPACK® stand up pouches with cap
Thimonnier Strengthens its expertise regarding dairy products in flexible pouches with its SF102 Ultra Clean spout filling line thanks tor Pulsed Light decontamination from Claranor.